Download of CoBrite software

Cobrite software on memory stick

Download For CoBrite firmware upgrade (ID Photonics provided)

Firmware upgrade tool

Instruction manual

In short:

  • Run the .exe file
  • Select the right COM port
  • Click 'Connect'; communication with the unit will start. You should unplug the power supply and plug it in again to contact the bootloader
  • Click 'Load Hex File' and select the firmware file (below)
  • Click 'Erase-Program-Verify' and the program will upload the new firmware
  • Click 'Disconnect' and exit the program

Firmware file